img
  1. CEMB
  2. Vibration Equipment Division
  3. Condition monitoring Vibration transmitters
  4. TR-A / V / VMT vibration monitoring

TR-A / V / VMT vibration monitoring

Absolute vibration monitoring Transmitter with provision for fastening to a DIN guide

The TR-A/V/VMT transmitter connected to a dedicated transducer (accelerometer, velocimeter or velomitor) measures absolute vibration of any machine support and is capable of directly interfacing with an acquisition system (PLC or DCS) in 2-wire (4-20 mA current loop) or 3-wire technique

GENERAL DESCRIPTION

The TR-A/V/VMT vibration monitoring device processes the signal coming from the transducer connected to it and converts it into a proportional analogue signal at the measured magnitude.It can be installed in a secure area and connected by means of certified barriers to intrinsic safety transducers positioned in a classified area.

It comes complete with terminal strips for connection to a power supply, input and output signals and a BNC for connection to an analyser.

Standard

Composition Transmitter with provision for fastening to a DIN guide
TR-A interfaceable with accelerometers with a sensitivity of 100 mV/g (TA-18 – TA-18/S)
TR-V interfaceable with velocimeters with a sensitivity of 21.2 mV/mm/s (T1-40 – T1-40V – T1-40BF – T1-38 – T1-38V – T1-38BF)
TR-VMT interfaceable with velomitor TV-22 (3,94 mV/mm/s)
Power supply 24 VDC nominal
18-30 VDC for 2-wire version
24-35 VDC for 3-wire version
External connections Terminal strip for connection to a PLC/DCS (2- or 3-core screened cable, max. cross-section 2.5mm²)
Terminal strip for connection to a transducer (2- or 2-core screened cable, max. cross-section 2.5mm²)
BNC for connection to an analyser
Operating temperature range 35°C ÷ +70°C
Type of measurement Absolute vibration
Dynamic performance 5 ÷ 10.000Hz
Linearity ± 2% over the entire measurement range and within the operating temperature limits
Insulation ≥10⁸ Ω between signals and container

    Name (mandatory):

    Email (mandatory):

    Phone (mandatory):

    Company (mandatory):

    Country (mandatory):

    Notes:


    I hereby declare to have read of the informative note according to art. 13 of G.D.P.R. and I give my consent for the treatment of my personal data.

    CEMB

    CEMB S.p.A. Via Risorgimento n.9 - 23826 Mandello del Lario (Lc) Italy - T +39 0341 706111
    Cap Soc. 1.500.000 i.v. - Reg. Imprese Lecco 00221870132 - C.C.I.A.A. Lecco R.E.A. 75997 - Società Unipersonale - Partita IVA IT 00221870132