ER85 EVO
Touchscreen wheel balancer with run-out measurement
Vibrations caused by run-out do not depend on the unbalance of wheel. The ER85 EVO, with one single quick spin, detects all causes of vibraton. The EMS Sonar, supplied as standard on machine, detects wheel eccentricity with a 0,1 mm accuracy and enables a precise diagnosis within seconds. The new model ER85 EVO is now even more efficient thanks to the automatic positioning system.
- Ergonomic design
The ErgoFast range of wheel balancers has been developed to offer the operator the best posssible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.
- Detection of wheel data
The automatic gauge for distance and diameter input (up to 28″ rims) and the LA Sonar device for wheel width measurement allow an immediate detection of all necessary wheel parameters.
- Adhesive counter-weights positioning by means of SPOTTER Laser
Wheel locked in position for weight applications, LED light to illuminate working area in the internal part of rim and SPOTTER Laser for accurate positioning of the counter-weights guarantee a perfect balancing operation in one single spin.
- Pneumatic locking of wheel
Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions (SE Version).
- OPB: One plane balancing
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.
- AutoAdaptive Mode
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.
- New automatic positioning system
The new automatic positioning system with electromagnetic brake grants extreme speed during positioning and an immediate lock of the wheel.
- HubMatch
If the machine is equipped with EMS Sonar, HubMatch detects the unbalance as well as the highest point of the wheel (1st harmonics), and displays it on-screen to enable mounting of wheel on vehicle so that simply matching mechanical clearances when positioning the rim on the hub will eliminate the eccentricity
- Industry 4.0 kit (optional)
Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
Standard
Optional
| Single phase power supply | 115 / 230 V 50 / 60 Hz |
| Max. absorbed power | 0,15 kW |
| Balancing speed | 100 rpm |
| Measuring cycle for 15 kg (33 lb) wheel | 4.7 s |
| Measurement uncertainty | ± 0,5 g |
| Resolution | 0,5 g |
| Average noise | < 70 dB (A) |
| Rim width setting range | 1.5” ÷ 20” oppure 40 ÷ 510 mm |
| Rim diameter setting range | 10” ÷ 30” oppure 265 ÷ 765 mm |
| Min./Max. compressed air pressure | 8 ÷ 10 kg / cm2 | ~ 0.8 ÷ 1 MPa | ~ 8 ÷ 10 bar | ~ 115 ÷ 145 psi |
| Max. wheel weight | < 75 kg |
| Machine weight | 150 kg |
SE kit
Ring, quick locking sleeve SE2 and SE spacer
3 cones kit
3 Cones Kit Ø 45÷110 mm, pincer-hammer and 60 g. counterweight
Gauge
Width gauge
Zero gravity effect
Wheel loading and removal without effort or adjustment
PERFECT CENTERING
Wheel automatic lifting – Ideal centering and more accurate balancing.
QUICK
Quicker than any other traditional lift – A single pedal controls the whole working cycle.
AUTOMATIC
Electronic system with PLC.
UNIVERSAL
Applicable to any CEMB balancing machine.
RL cup 41FF79255
Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).
UH20/2 41FF42048
For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.
VL/2 cone + G36 disc 41FF86174
Kit for light truck wheels (Ø 97÷170mm centre hole).
SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE
Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.
Renault kit 41FF77152
High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.
MT2 cone 40FF018655
High precision stepped cone for German cars. (Ø 56,5 / 57 / 66,5 / 70÷72,5 mm diam).
Mercedes kit 41FF88003
High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.
Easyweight lift
Professional lift with zero weight effect. Loading and removal of the wheel takes place without any effort or adjustment. PERFECT CENTERING: Any misalignment caused by the weight of the wheel on the shaft during centering is minimized. Lift up/down movement is mechanical, by compressed air.
Industry 4.0 Kit
Industry 4.0 Kit allows an optimal planning of the work activity inside the workshop.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
