ER80
Formula 1 chooses the wheel balancing machine with touch panel!
A high-performance digital wheel balancer developed to ease and quicken every phase of balancing operation. The ER80SE was selected by the F1 world championship for balancing all of their wheels. Since 2012 thirty ER80SE’s work endlessly on their worldwide tracks, guaranteeing security and performance to all the teams.
- Ergonomic design
The ErgoFast range of balancing machines has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.
- Detection of wheel data
The automatic gauge for distance and diameter input (up to 28″ rims) and the LA Sonar device for wheel width measurement allow an immediate detection of all necessary wheel parameters.
- Adhesive counter-weights positioning by means of SPOTTER Laser
Wheel locked in position for weight applications, LED light to illuminate working area in the internal part of rim and SPOTTER Laser for accurate positioning of the counter-weights guarantee a perfect balancing operation in one single spin.
- OPB: One plane balancing
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.
- AutoAdaptive Mode
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.
- Automatic Approach
Once the measuring launch is completed, thanks to the Automatic Approach system, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing the operator to position it correctly with a little movement.
- Pneumatic locking of wheel (ER80SE)
Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions. (SE Version)
- Industry 4.0 kit (optional)
Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
Standard
Optional
| Single phase power supply | 115 / 230 V 50 / 60 Hz |
| Max. absorbed power | 0,15 kW |
| Balancing speed | 100 rpm |
| Measuring cycle for 15 kg (33 lb) wheel | 4.7 s |
| Measurement uncertainty | ± 0,5 g |
| Resolution | 0,5 g |
| Average noise | < 70 dB (A) |
| Rim width setting range | 1.5” ÷ 20” oppure 40 ÷ 510 mm |
| Rim diameter setting range | 10” ÷ 30” oppure 265 ÷ 765 mm |
| Min./Max. compressed air pressure | 8 ÷ 10 kg / cm2 | ~ 0.8 ÷ 1 MPa | ~ 8 ÷ 10 bar | ~ 115 ÷ 145 psi |
| Max. wheel weight | < 75 kg |
| Machine weight | 120 kg |
UC20/SE2 41FF52768
Standard equipment composed of: 3 cones Ø 45÷110 mm, quick locking sleeve SE2, width gauge, pincer-hammer and 60 g counterweight.
Zero gravity effect
Wheel loading and removal without effort or adjustment
PERFECT CENTERING
Wheel automatic lifting – Ideal centering and more accurate balancing.
QUICK
Quicker than any other traditional lift – A single pedal controls the whole working cycle.
AUTOMATIC
Electronic system with PLC.
UNIVERSAL
Applicable to any CEMB balancing machine.
RL cup 41FF79255
Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).
UH20/2 41FF42048
For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.
Peugeot – Citroën kit 41FF73171
High precision set of 1 bush Ø 60 + 2 cones (Ø 62÷68mm and Ø 54÷60mm). Developed on Peugeot and Citroën specs.
VL/2 cone + G36 disc 41FF86174
Kit for light truck wheels (Ø 97÷170mm centre hole).
SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE
Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.
Renault kit 41FF77152
High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.
MT2 cone 40FF018655
High precision stepped cone for German cars. (Ø 56,5 / 57 / 66,5 / 70÷72,5 mm diam).
Mercedes kit 41FF88003
High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.
Easyweight lift
Professional lift with zero weight effect. Loading and removal of the wheel takes place without any effort or adjustment. PERFECT CENTERING: Any misalignment caused by the weight of the wheel on the shaft during centering is minimized. Lift up/down movement is mechanical, by compressed air.
Industry 4.0 Kit
Industry 4.0 Kit allows an optimal planning of the work activity inside the workshop.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
