C330
Automatic digital balancer for truck wheels
New digital balancing machine suitable for truck, bus and car wheels up to 200 kg. The innovative solution of the spindle shaft that lowers, guarantees a safer and easier centring even with large wheels, thus facilitating the operator.
- Lifting Spindle
Lifting Spindle: the shaft rises and lowers to facilitate wheel loading by the operator and guarantees a perfect centring with minimum effort.
Wheel, when raises, is already clamped on the spindle, in complete safety.
The sliding trolley, with a height of only 59 mm, allows a faster and easier loading of the wheel, without the need for dynamic handling.
- LA Sonar
LA sonar device for automatic wheel width measurement without any contact.
- Laser Line
Laser line to facilitate the correct positioning of the adhesive counterweights in the 6 o’clock position, increasing the balancing accuracy.
- Weight Tray
The sturdy rotational weight tray has been designed to make the most the available space. The differentiated compartments allow a simple housing of cones, clamp weights, adhesive weights, grippers etc…
- Electromagnetic Brake
The electromagnetic brake for the lock of the wheel in the exact weight position facilitates the balancing procedure.
- Automatic Gauge
Extended gauge for diameter and distance measurement of rims up to 32”.
- Software
The software, entirely developed by CEMB, is easy to use and supports SPLIT, OPT and ALU programs.
- Industry 4.0 Kit (optional)
Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
Standard
Optional
| Single phase power supply | 230V/1ph/50 hz |
| Single phase power supply | 115V/1ph/50 hz |
| Max. absorbed power | 1,1 kW |
| Balancing speed | 130 rpm car/ 80 rpm truck |
| Measuring cycle for car/truck wheel | 8 ÷ 20 s |
| Measurement uncertainty | ± 0.5 g |
| Resolution | 1 g car / 10 g truck |
| Average noise | < 70 dB (A) |
| Rim width setting range | 1.5" ÷ 20" / 40 ÷ 510 mm |
| Rim diameter setting range | 10" ÷ 30" / 265 ÷ 765 mm |
| Min./Max. compressed air pressure | 8 ÷ 12 kg/cm² / ~ 0.8 ÷ 1,2 MPa ~ 8 12 bar / 120 ÷ 165 psi |
| Max. wheel weight | 200 kg |
| Max. wheel diameter | 1380 mm |
| Machine weight | 210 kg |
Quick lock nut
Plastic lock nut with quick locking.
Pincer
Pincer-hammer
Gauge
Width gauge
IV/V – GG – G40 cones kit
Kit made up of IV and V cones, G40 disc and GG ring to centre truck or bus wheels with a central hole of 202/221/281 mm Ø.
SR 215/2 Kit
Supplied with centring adaptor, 5 and 4 armed spiders, stud bolts and screws to centre wheels with 8 holes on 275/285.75 mm Ø and with 10 holes on 225/285.75/335 mm Ø.
Car adaptor kit
For wheels with a central hole of 45-194 mm Ø. Consists of 4 cones and G40 disc.
Industry 4.0 Kit
Industry 4.0 Kit allows an optimal planning of the work activity inside the workshop.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
