![img](https://www.cemb.com/wp-content/themes/cemb-wp/assets/img-header.jpg)
C130
The compact wheel balancer designed for mobile service in conjunction with the tyre changer SMT26
Two-in-one integrated system for maximum professionalism in mobile service; a single solution which combines a compact and efficient manual spin balancing machine with automatic gauge and SMT26, an electro-hydraulic tyre disassembly tool to operate on truck, bus and car wheels up to a diameter of 26”, all easily installed on a van.
- Quick and easy installation
Quick assembly and disassembly of the spindle for rapid commissioning of the balancing machine and for space-saving transport.
- Automatic gauge
Automatic gauge for 2D distance and diameter acquisition and manual wheel width setting.
- Manual spin
Manual spin by means of a knob on the fixing ring; low rotation speed.
- Digital display
Intuitive display graphics to switch from truck wheels to car wheels with extreme simplicity.
- Software
Wide program availability for maximum balancing efficiency with all measurable wheels.
- Weight tray
Functional weight tray for housing cones, clip-on and stock-on weights, pliers.
Single phase power supply | 230 V/1ph/50 Hz |
Single phase power supply | 115V/1ph/60 Hz |
Max. absorbed power | 1,1 kW |
Balancing speed | 130 rpm vettura / 80 rpm autocarro |
Measuring cycle for car/truck wheel | 8 ÷ 20 s |
Measurement uncertainty | ± 0.5 g |
Resolution | 1 g vettura / 10 g autocarro |
Average noise | < 70 dB (A) |
Rim width setting range | 1.5" ÷ 20" / 40 ÷ 510 mm |
Rim diameter setting range | 10" ÷ 30" / 265 ÷ 765 mm |
Min./Max. compressed air pressure | 8 ÷ 12 kg/cm² / ~ 0.8 ÷ 1,2 MPa ~ 8 12 bar / 120 ÷ 165 psi |
Max. wheel weight | 200 kg |
Max. wheel diameter | 1380 mm |
![](https://www.cemb.com/wp-content/uploads/Ingombro-C130.png)
Quick lock nut for manual spin
Plastic lock nut with quick locking for manual spin.
![](https://www.cemb.com/wp-content/uploads/volantino-bloccaggio-rapido-MANUALE.png)
Gauge
Width gauge
![](https://www.cemb.com/wp-content/uploads/calibro-manuale-e1644919597871.png)
Plier
Plier for alloy rims
![](https://www.cemb.com/wp-content/uploads/plier.png)
![](https://www.cemb.com/wp-content/uploads/SMT26.png)
Electro-hydraulic tyre changer designed for mobile service to operate on truck, bus and car wheels up to a diameter of 26″.
![](https://www.cemb.com/wp-content/uploads/BOX22-2MEL-00_détouré2-800x800.png)
GENERATOR + COMPRESSOR UNIT
Rated output cfm at 90 PSI 600L/min.
Pressure range PSI 12 bar.
IV/V – GG – G40 cones kit
Kit made up of IV and V cones, G40 disc and GG ring to centre truck or bus wheels with a central hole of 202/221/281 mm Ø.
![](https://www.cemb.com/wp-content/uploads/IV-V-CONES-GG-G40-KIT-e1644920264236.png)
SR 215/2 Kit
Supplied with centring adaptor, 5 and 4 armed spiders, stud bolts and screws to centre wheels with 8 holes on 275/285.75 mm Ø and with 10 holes on 225/285.75/335 mm Ø.
![](https://www.cemb.com/wp-content/uploads/SR-215-2-KIT-e1644920877600.png)
Car adaptor kit
For wheels with a central hole of 45-194 mm Ø. Consists of 4 cones and G40 disc.
![](https://www.cemb.com/wp-content/uploads/kit_vettura.png)