ER100 GT

The fastest diagnostics balancing machine in the world

The new version of the CEMB top-of-the-range wheel balancer is even faster and more efficient.  In just 6,4 seconds and without any manual intervention on behalf of the operator the machine automatically detects all wheel dimensions, unbalance, internal and external wheel and rim eccentricity, tread-depth and conicity.

Wheel structure analysis in just 6,4 seconds

Very often wheel vibrations are not caused by unbalances, but by a structural (geometrical) difformity of the wheel itself. ER100 GT in a few seconds of a single spin displays unbalance and eccentricity of tire and rim.
The operator will be allerted on the screen when the total eccentricity value exceeds the maximum tolerance admissible.
Should the run-out value be out of tolerance, simply pressing a push-button the operator can visualize the best tire/rim mutual positioning to drive the total eccentricity value within tolerance.
If the operator requires, during the same measuring cycle, ER100 GT can display also the values of conicity and tread-depth, detected through laser scan. The machine can also measure the eccentricity of the rim alone. A double scan on the two separate bead seating positions acknowledge the exact structure of the rim.

Ergonomic design

The new CEMB ER100 GT wheel balancer has an attractive and modern design, while retaining the characteristics of the ErgoFast range. The ErgoFast line has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch screen are only but a few of the advantages developed for our end users.

3D Laser Scan

– Touchless wheel distance and diameter measuring system which, combined with the external radial laser for width measurement, detects with 3D precision the dimensions of any profile, even the most complex; no intervention of the operator.

– Advanced technology that speeds up the dimensions reading process without penalizing reliability and precision.

– Brighter laser pointer that grants an extreme accuracy during correction thanks to a clear indication of the application point for stick-on weights.

– Greatest robustness for a long lasting usage. No moving parts are exposed, risks of damages are reduced

– Easy maintenance

External laser scan

The external laser performs a complete wheel diagnosis including tyre conicity and wear analysis in three different areas.

Side Laser

Two laser beams indicate the exact 12 o’clock position to place clip-on weights. With these accurate reference points, any possibility of erratically placing counterweights is eliminated.

One plane balancing

OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.

AutoAdaptive Mode

The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration.  For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.

HubMatch

HubMatch detects the unbalance as well as the highest point of the wheel (1st harmonics), and displays it on-screen to enable mounting of wheel on vehicle so that simply matching mechanical clearances when positioning the rim on the hub will eliminate the eccentricity.

New automatic positioning system

An electromagnetic brake has been added on the DC motor, resulting in a doubled speed during positioning and an immediate lock of the wheel.

Industry 4.0 kit (optional)

Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.