img

DWA1100 Hybrid light

Wheel alignment system for cars and trucks - only the "essential"

Wheel alignment system for cars, light commercial vehicles, trucks and buses.
The light version differs respect to the complete version, as only the essential components for alignment are supplied. From an economic point of view, this is te ideal solution to allocate this technoloy even to customers who, fpr the first time wish to carry out wheel alignment and containing investment costs.
CCD (Charged Coupled Device) sensor technology, featuring state-of-the-art electronic componentry, enbles a quick and accurate measurement of all alignment parameters by simply following a procedure field tested through many years of experience.

Database

The new vehicle model ranking system allows a rapid and clear selection of the different vehicles.
The CEMB car database contains more than 55.000 vehicles and more than 50.000 the truck ones. Both are constantly updated.

Lithium Batteries

Featuring a long durability when batteries are charged.
The batteries are immune to the “memory effect” and can be rechared at any time.

Radio communication 2,4 GHz

The radio communication between sensors and computer uses a frequency of 2,4 GHz. This technology features a stable and reliable communication over a lengthy period.
There are 7 different channel communications available which can be useful in cases of multiple installations and/or solving interference problems.

MEMS Accelerometer

Together with the CCD cameras, the MEMS accelerometer (derived from the aeronautical field), provides the acquisition of the alignment parameters of wheels. It measures the sensor inclinations accordng to the two main axles (caster and camber).
The accelerometer has completly substituted the previous pendulum-tipe inclinometers which were very delicate and sensitive to shocks. No more problems due to shocks.

Userfriendly Software

Features very clear and userfriendly graphics. The software system, entirely developed by CEMB, guides the user through all the alignment operations. Complete with AUDIT function for the identification of driving problems, resulting from measures not contemplated in the specifications to support the regulation service.

Electronic control unit

The light version is supplied without a pc. Contact your local distributor for possible options.

cartruck

Standard

Power supply 230 VAC single-phase 50/60 Hz | 115 VAC single-phase

Dotazione standard DWA1100 Hybrid light

2 rilevatori senza cavi CAR + 2 rilevatori TRUCK a 8 sensori, batterie al litio, comunicazione BT², 4 aggrappi a 4 punti 12″-24″, unghiette universali L=80mm, unghiette L=48mm con superficie di appoggio per ridurre l’errore di runout, unghiette per autocarro L=120mm, elastico di sicurezza.
1 bloccasterzo e 1 bloccafreno.

Software e database per auto e trasporto leggero

Clamp extensions up to 30″

Extensions to increase the operating diameter up to 30”.

Grips for steel rims

Set of 4 metal grips for clamping on steel rims from the inside (also useable as adapters for others tips and grips).

Calibration kit

Calibration kit complete with spirit level to calibrate measuring heads

Backup cables

Set of 4 feeding cables for recharging batteries when measuring heads are mounted on vehicle (13m length)

Clamping arms kit

Clamp supporting arms and set of tips for tyres with external diameter 22″ – 31″

Truck turnplates

Two truck turnplates, capacity 4500Kg, diameter 40cm, height 5.5cm, nylon spheres

Adaptor rod for semitrailers’ king pin

Aligner rod for semi-trailers

50″ Supporting arms extension

Extended clamp supporting arms for truck and bus tyres up to 50”.

40″ supporting arms extensions

Extended clamp supporting arms for tyres up to 40”.

Ramps for Truck turnplates

Ramps for truck turnplates

Trolley & wall panel

Couple of wall panels to hang wheel clamps and accessories

 

Turnplates for car

Two mechanical turnplates for car

Premium Turnplates

Two premium turnplates for car complete with paddles

KIT ADAS CCD

The CEMB KIT ADAS CCD allows positioning of the CCD sensors on any ADAS/ACC calibration structure by means of universal adapters and, through a very quick and simple software included in the alignment program, enables to facilitate the positioning.

3-point clamps

Set of four 3-point self-centering wheel clamps for rims 12″-23″.

    Name (mandatory):

    Email (mandatory):

    Phone (mandatory):

    Company (mandatory):

    Country (mandatory):

    Notes:


    I hereby declare to have read of the informative note according to art. 13 of G.D.P.R. and I give my consent for the treatment of my personal data.