img
  1. CEMB
  2. Vibration Equipment Division
  3. Condition monitoring Condition monitoring
  4. TM1 Vibration monitoring

TM1 Vibration monitoring

Dual channel equipment for absolute vibration monitoring

The Vibration monitoring equipment continuously measures the vibrations of rotating machines by supplying analog outputs (for interfaces to PLC or DCS) or digital outputs (alarm and trip contacts) with the display on a digital readout of the found value.

TM1 acquires the signal of two velocity sensors (T1-40) or acceleration sensors (TA-18/S) and supplies an analog signal proportional to vibration and two alarm contacts for each channel.
During the start-up of a rotating machine the display allows to read immediately the vibration level. BNC connectors are available for FFT analysis.

The equipment can be connected to other instruments (max. 32) via serial line RS485 or to a PC (through appropriate interface) for setting and reading the stored data by the various measuring parameters

Standard

    Name (mandatory):

    Email (mandatory):

    Phone (mandatory):

    Company (mandatory):

    Country (mandatory):

    Notes:


    I hereby declare to have read of the informative note according to art. 13 of G.D.P.R. and I give my consent for the treatment of my personal data.

    CEMB

    CEMB S.p.A. Via Risorgimento n.9 - 23826 Mandello del Lario (Lc) Italy - T +39 0341 706111
    Cap Soc. 1.500.000 i.v. - Reg. Imprese Lecco 00221870132 - C.C.I.A.A. Lecco R.E.A. 75997 - Società Unipersonale - Partita IVA IT 00221870132